|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
GaAs-IR-Lumineszenzdiode GaAs Infrared Emitter LD 242 o0.45 2.54 mm spacing Chip position o4.3 o4.1 1 0.9 .1 1.1 .9 0 2.7 1 14.5 12.5 3.6 3.0 o5.5 o5.2 GET06625 Anode (LD 242, BPX 63, SFH 464) Cathode (SFH 483) Approx. weight 0.5 g Mae in mm, wenn nicht anders angegeben/Dimensions in mm, unless otherwise specified. Wesentliche Merkmale q GaAs-IR-Lumineszenzdiode, hergestellt im q q q q q Features q GaAs infrared emitting diode, fabricated in a q q q q q Schmelzepitaxieverfahren Kathode galvanisch mit Gehauseboden verbunden Hohe Zuverlassigkeit Groer Offnungskegel Gehausegleich mit BP 103, BPX 63, SFH 464, SFH 483 Anwendungsklasse nach DIN 40 040 GQG liquid phase epitaxy process Cathode is electrically connected to the case High reliability Wide beam Same package as BP 103, BPX 63, SFH 464, SFH 483 DIN humidity category in acc. with DIN 40 040 GQG Anwendungen q IR-Fernsteuerungen und Tonubertragungen q Lichtschranken fur Gleich- und Applications q IR remote control and sound transmission q Photointerrupters Wechsellichtbetrieb Typ Type LD 242-2 LD 242-3 LD 242 E7800 Bestellnummer Ordering Code Q62703-Q198 Q62703-Q199 Q62703-Q3509 Gehause Package Bodenplatte nach 18 A3 DIN 41876 (TO-18), klares Epoxy-Gieharz, linsenformig im 2.54-mm-Raster (1/10'') Base plate as per 18 A3 DIN 41876 (TO-18), transparent epoxy resin lens, solder tabs lead spacing 2.54 mm (1/10'') Semiconductor Group 1 1998-07-15 fet06625 LD 242 Grenzwerte Maximum Ratings Bezeichnung Description Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Durchlastrom, TC = 25 C Forward current Stostrom, 10 s, D = 0 Surge current Verlustleistung, TC = 25 C Power dissipation Warmewiderstand Thermal resistance Symbol Symbol Wert Value - 40 ... + 80 5 300 3 470 450 160 Einheit Unit C V mA A mW K/W K/W Top; Tstg VR IF IFSM Ptot RthJA RthJC Kennwerte (TA = 25 C) Characteristics Bezeichnung Description Wellenlange der Strahlung Wavelength at peak emission IF = 100 mA, tp = 20 ms Spektraler Bandbreite bei 50 % von Imax Spectral bandwidth at 50 % of Imax IF = 100 m A, tp = 20 ms Abstrahlwinkel Half angle Aktive Chipflache Active chip area Abmessungen der aktive Chipflache Dimension of the active chip area Abstand Chipoberflache bis Linsenscheitel Distance chip surface to lens top Symbol Symbol peak Wert Value 950 Einheit Unit nm 55 nm 40 0.25 0.5 x 0.5 0.3 ... 0.7 Grad deg. mm2 mm mm A LxB LxW H Semiconductor Group 2 1998-07-15 LD 242 Kennwerte (TA = 25 C) Characteristics Bezeichnung Description Schaltzeiten, Ie von 10 % auf 90 % und von 90 % auf 10 %, bei IF = 100 mA, RL = 50 Switching times, Ie from 10 % to 90 % and from 90 % to 10 %, IF = 100 mA, RL = 50 Kapazitat Capacitance VR = 0 V Durchlaspannung Forward voltage IF = 100 mA IF = 1 A, tp = 100 s Sperrstrom, VR = 5 V Reverse current Gesamtstrahlungsflu Total radiant flux IF = 100 mA, tp = 20 ms Temperaturkoeffizient von Ie bzw. e, IF = 100 mA Temperature coefficient of Ie or e, IF = 100 mA Temperaturkoeffizient von VF, IF = 100 mA Temperature coefficient of VF, IF = 100 mA Temperaturkoeffizient von peak, IF = 100 mA Temperature coefficient of peak, IF = 100 mA Symbol Symbol Wert Value 1 Einheit Unit s tr, tf Co 40 pF VF VF IR e 1.3 ( 1.5) 1.9 ( 2.5) 0.01 ( 1) 16 V V A mW TCI - 0.55 %/K TCV TC - 1.5 0.3 mV/K nm/K Semiconductor Group 3 1998-07-15 LD 242 Gruppierung der Strahlstarke Ie in Achsrichtung gemessen bei einem Raumwinkel = 0.01 sr Grouping of radiant intensity Ie in axial direction measured at a solid angle of = 0.01 sr Bezeichnung Description Strahlstarke Radiant intensity IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s 1) Symbol -2 -3 Werte Values 78001) Einheit Unit Ie Ie typ. 4 ... 8 50 > 6.3 75 1 ... 3.2 - mW/sr mW/sr Die Messung der Strahlstarke und des Halbwinkels erfolgt mit einer Lochblende vor dem Bauteil (Durchmesser der Lochblende: 1.1 mm; Abstand Lochblende zu Gehauseruckseite: 4.0 mm). Dadurch wird sichergestellt, da bei der Strahlstarkemessung nur diejenige Strahlung in Achsrichtung bewertet wird, die direkt von der Chipoberflache austritt. Von der Bodenplatte reflektierte Strahlung (vagabundierende Strahlung) wird dagegen nicht bewertet. Diese Reflexionen sind besonders bei Abbildungen der Chipoberflache uber Zusatzoptiken storend (z.B. Lichtschranken groer Reichweite). In der Anwendung werden im allgemeinen diese Reflexionen ebenfalls durch Blenden unterdruckt. Durch dieses, der Anwendung entsprechende Meverfahren ergibt sich fur die Anwender eine besser verwertbare Groe. Diese Lochblendenmessung ist gekennzeichnet durch den Eintrag "E 7800", der an die Typenbezeichnung angehangt ist. An aperture is used in front of the component for measurement of the radiant intensity and the half angle (diameter of the aperture: 1.1 mm; distance of aperture to case back side: 4 mm). This ensures that solely the radiation in axial direction emitting directly from the chip surface will be evaluated during measurement of the radiant intensity. Radiation reflected by the bottom plate (stray radiation) will not be evaluated. These reflections impair the projection of the chip surface by additional optics (e.g. long-range light reflection switches). In respect of the application of the component, these reflections are generally suppressed by apertures as well. This measuring procedure corresponding with the application provides more useful values. This aperture measurement is denoted by "E 7800" added to the type designation. 1) Semiconductor Group 4 1998-07-15 LD 242 Relative spectral emission Irel = f () 100 % OHR01938 Radiant intensity Ie = f (IF) Ie 100 mA OHR01037 Single pulse, tp = 20 s e 10 2 Max. permissible forward current IF = f (TA) 300 OHR00971 e (100 mA) F mA 250 rel 80 10 1 60 200 R thJL = 160 K/W 150 40 R thJA = 450 K/W 10 0 20 100 50 0 880 920 960 1000 nm 1060 10 -1 10 -2 10 -1 10 0 A F 10 1 0 0 20 40 60 80 C 100 T A, T L Forward current IF = f (VE) 10 1 A OHR01040 Permissible pulse handling capability IF = f (), TC = 25 C, duty cycle D = parameter F 10 4 mA 5 OHR01937 F tP D= tP T F T D= 0.005 0.01 0.02 0.05 0.1 10 0 typ. max. 10 3 5 0.2 0.5 10 -1 DC 10 -2 1 1.5 2 2.5 3 3.5 4 V 4.5 VF 20 10 0 1.0 10 2 10 -5 10 -4 10 -3 10 -2 s 10 0 Radiation characteristics Irel = f () 40 30 OHR01877 50 0.8 60 0.6 70 0.4 80 90 0.2 0 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 Semiconductor Group 5 1998-07-15 |
Price & Availability of LD242E7800 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |